RECEIVERS

R2000 Telemetry Receiver

For medium scale studies not needing datalogging.

Highlights:

  • Large knobs for ease of use
  • 2 MHz range, 2000 channels scannable
  • Rechargeable battery up to 8 hr. use
  • Carry case and battery charger included
  • Specify a 2 MHz range between 30 - 52 MHz or 140 - 220 MHz when ordering

Controls

  • Frequency selectors (4)
  • Audio level
  • Delta tune
  • RF gain
  • Increment frequency up/down
  • Auto scan/memory bypass
  • Receiver on/off
  • Dwell time (scan rate)
  • Add-delete to memory
  • Stop Scan

Memory

  • All frequencies programable in each bank
  • Sequentially scanned
  • Battery backed
  • Delete all frequencies in each bank
  • Delete frequencies individualy with single switch while scanning or on standby

Display

Selected frequency
LCD (0.5” digits) with backlight for night use
Memory status
Colon in display indicates frequency stored in memory
Battery status
low batt indicator flashes when battery voltage is low
Signal level
0-1 mA meter

Connections

Antenna
BNC
Headset
Receptacle for ¼” mono phone plug
Signal level
0.125" phone receptacle for external 0.1 mA current meter
External power/recharge
5-pin DIN

Power

12 volts DC nominal
130 mA drain nominal
Internal
1.2 amp-hour NiCad battery pack; 8-hour nominal operating time
External
9 to 18 volts, negative ground; switches automatically to external power

Physical

Size
11 cm wide x 21 cm long x 18 cm high (4.3” x 8.3” x 7”)
Weight
2.3 kg (5 lbs)

Environmental

Operating temperature
-20 degrees C to 50 degrees C
Storage temperature:
-70 degrees C to 60 degrees C
Humidity
95% non-condensing

Warranty

One year parts and labor on materials and workmanship

Features and specifications subject to change without notice.

Accessories

All Accessories